3com WX3000 Manuel D’Utilisation
1-5
SSH Server Configuration Tasks
Complete the following tasks to configure SSH server:
Task
Remark
Required
Required
Optional
Required
Optional
Optional
Required for pubilckey
authentication; unnecessary for
password authentication
authentication; unnecessary for
password authentication
Required for pubilckey
authentication; unnecessary for
password authentication
authentication; unnecessary for
password authentication
Configuring the
SSH server
SSH server
Optional
Configuring the Protocol Support for the User Interface
You must configure the supported protocol(s) for SSH remote login. Note that the configuration does not
take effect immediately, but will be effective for subsequent login requests.
Follow these steps to configure the protocol(s) that a user interface supports:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enter the view of one or
multiple user interfaces
multiple user interfaces
user-interface [ type ]
first-number [ last-number ]
first-number [ last-number ]
—
Configure the authentication
mode as scheme
mode as scheme
authentication-mode scheme
[ command-authorization ]
[ command-authorization ]
Required
By default, the user interface
authentication mode is
password
authentication mode is
password
Specify the supported
protocol(s)
protocol(s)
protocol inbound { all |ssh |
telnet }
telnet }
Optional
By default, both Telnet and
SSH are supported.
SSH are supported.