3com WX3000 Manuel D’Utilisation

 

1-9 

Enter system view 

— 

Set SSH authentication timeout 
time 

ssh server timeout seconds 

Optional 

By default, the timeout time is 
60 seconds.  

Set SSH authentication retry 
times 

ssh server 
authentication-retries times 

Optional 

By default, the number of retry 
times is 3.  

Set RSA server key update 
interval 

ssh server rekey-interval 
hours 

Optional 

By default, the system does not 
update RSA server keys. 

Configure SSH server to be 
compatible with SSH1.x clients 

Optional 

By default, SSH server is 
compatible with SSH1.x clients. 

Configure a login header 

header shell text 

Optional 

By default, no login header is 
configured. 

 

z 

You can configure a login header only when the service type is stelnet. For configuration of service 

z 

For details of the header command, see the corresponding section in Login Command.  

 

 

This configuration is not necessary if the password authentication mode is configured for SSH users. 

 

With the publickey authentication mode configured for an SSH client, you must configure the client’s 

RSA or DSA host public key(s) on the server for authentication.  

You can manually configure the public key or import it from a public key file. In the former case, you can 

manually copy the client’s public key to the server. In the latter case, the system automatically converts 

the format of the public key generated by the client to complete the configuration on the server, but the 

client’s public key should be transferred from the client to the server beforehand through FTP/TFTP. 

Follow these steps to configure the client’s public key manually: 

Enter system view 

— 

Enter public key view 

public-key peer keyname 

Required