3com WX3000 Manuel D’Utilisation
1-6
To do…
Use the command…
Remarks
Configure a shell banner
header shell text
Use either command or both.
By default, no banner is
configured.
configured.
For details about the header command, refer to the Login part of the manual.
Displaying FTP server information
To do…
Use the command…
Remarks
Display the information about FTP server
configurations on the device
configurations on the device
display ftp-server
Display the source IP address set for an
FTP server
FTP server
display ftp-server source-ip
Display the login FTP client on an FTP
server
server
display ftp-user
Available in any view
FTP Configuration: The Device Operating as an FTP Client
Basic configurations on an FTP client
By default the device can operate as an FTP client In this case you can connect the device to the FTP
server to perform FTP-related operations (such as creating/removing a directory) by executing
commands on the device.
Follow these steps to perform basic configurations on an FTP client:
To do…
Use the command…
Remarks
Enter FTP client view
ftp [ cluster | remote-server
[ port-number ] ]
[ port-number ] ]
—
Specify to transfer files in ASCII
characters
characters
ascii
Specify to transfer files in
binary streams
binary streams
binary
Use either command
By default, files are transferred
in ASCII characters.
in ASCII characters.
Set the data transfer mode to
passive
passive
passive
Optional
passive by default.