3com WX3000 Manuel D’Utilisation

 

1-13 

<device> 

# After downloading the file, use the startup saved-configuration command to specify the 

downloaded configuration file as the main configuration file for next startup, and then restart the device. 

<device>startup saved-configuration config.cfg main 

 Please wait........................................Done! 

 

For information about the startup saved-configuration command and how to specify the startup file 

for the device, refer to the “System Maintenance and Debugging” module of this manual. 

 

Complete the following tasks to configure SFTP: 

Enabling an SFTP server 

Required 

Configuring connection idle time 

Optional 

Supported SFTP client software 

— 

— 

SFTP Configuration: The Device 
Operating as an SFTP Client 

Optional 

 

Before enabling an SFTP server, you need to enable the SSH server function and specify the service 

type of the SSH user as SFTP or all. For details, see the SSH server configuration part of SSH 

Operation Manual of this manual.  

Follow these steps to enable an SFTP server: 

Enter system view 

— 

Enable an SFTP server 

Required 

Disabled by default 

 

After the idle time is configured, if the server does not receive service requests from a client within a 

specified time period, it terminates the connection with the client, thus preventing a user from occupying 

the connection for a long time without performing any operation.  

Follow these steps to configure connection idle time: