3com WX3000 Manuel D’Utilisation

 

2-2 

TFTP server configuration 

For details, see the corresponding 
manual 

— 

 

By default the device can operate as a TFTP client. In this case you can connect the device to the TFTP 

server to perform TFTP-related operations (such as creating/removing a directory) by executing 

commands on the device.  

Follow these steps to perform basic configurations on a TFTP client: 

Download a file from a TFTP 
server 

tftp tftp-server get source-file 
[ dest-file ] 

Optional 

Upload a file to a TFTP server 

tftp tftp-server put source-file 
[ dest-file ] 

Optional 

Enter system view 

— 

Set the file transmission mode 

tftp { ascii | binary } 

Optional 

Binary by default 

Specify an ACL rule used by 
the specified TFTP client to 
access a TFTP server 

tftp-server acl acl-number 

Optional 

Not specified by default 

 

You can specify the source interface and source IP address for the device operating as a TFTP client, 

so that it can connect with a remote TFTP server through the IP address of the specified interface or the 

specified IP address. 

Follow these steps to specify the source interface and source IP address for a TFTP client: 

Specify the source interface 
used for the current connection 

tftp tftp-server 
source-interface 
interface-type interface-number 
{ get source-file [ dest-file ] | put 
source-file-url [ dest-file ] } 

Optional 

Not specified by default 

Specify the source IP address 
used for the current connection 

tftp tftp-server source-ip 
ip-address { get source-file 
[ dest-file ] | put source-file-url 
[ dest-file ] } 

Optional 

Not specified by default 

Enter system view 

—