3com WX3000 Manuel D’Utilisation

 

1-4 

Erase the startup configuration 
file from the storage device 

reset saved-configuration 
[ backup | main ] 

Required 

Available in user view 

 

You may need to erase the configuration file for one of these reasons: 

z 

After you upgrade software, the old configuration file does not match the new software.  

z 

The startup configuration file is corrupted or not the one you needed.  

The following two situations exist: 

z 

While the reset saved-configuration [ main ] command erases the configuration file with main 

attribute, it only erases the main attribute of a configuration file having both main and backup 

attribute. 

z 

While the reset saved-configuration backup command erases the configuration file with backup 

attribute, it only erases the backup attribute of a configuration file having both main and backup 

attribute. 

 

This command will permanently delete the configuration file from the device. 

 

Follow the step below to specify a configuration file for next startup: 

Specify a configuration file for 
next startup 

startup saved-configuration 
cfgfile [ backup | main ] 

Required 

Available in user view 

 

You can specify a configuration file to be used for the next startup and configure the main/backup 

attribute for the configuration file. 

z 

If you save the current configuration to the main configuration file, the system will automatically set 

the file as the main startup configuration file. 

z 

You can also use the startup saved-configuration cfgfile [ main ] command to set the file as main 

startup configuration file. 

z 

If you save the current configuration to the backup configuration file, the system will automatically 

set the file as the backup startup configuration file. 

z 

You can also use the startup saved-configuration cfgfile  backup command to set the file as 

backup startup configuration file.