3com WX3000 Manuel D’Utilisation

 

1-5 

The following table describes the configuration on HWPing server, which is the same for HWPing test 

types that need to configure HWPing server.  

Follow these steps to configure the HWPing server: 

Enter system view 

— 

Enable the HWPing server 
function 

Required 

Disabled by default. 

Configure a UDP listening 
service 

hwping-server udpecho 
ip-address port-num 

Required for UDP and jitter 
tests  

By default, no UDP listening 
service is configured. 

Configure a TCP listening 
service 

hwping-server tcpconnect 
ip-address port-num 

Required for TCP tests 

By default, no TCP listening 
service is configured. 

 

After HWPing client is enabled, you can create multiple test groups for different tests, without the need 

to enable HWPing client repeatedly for each test group. 

Different types of HWPing tests are somewhat different in parameters and parameter ranges. The 

following text describes the configuration on HWPing client for different test types. 

1)  Configuring ICMP test on HWPing client 

Follow these steps to configure ICMP test on HWPing client: 

Enter system view 

— 

Enable the HWPing client 
function 

Required 

By default, the HWPing client 
function is disabled. 

Create a HWPing test group 
and enter its view 

hwping administrator-name 
operation-tag 

Required 

By default, no test group is 
configured. 

Configure the destination IP 
address 

destination-ip ip-address 

Required 

By default, no destination 
address is configured. 

Configure the source IP 
address 

source-ip ip-address 

Optional 

By default, no source IP 
address is configured. 

Configure the test type 

test-type icmp 

Optional 

By default, the test type is 
ICMP.