3com WX3000 Manuel D’Utilisation
1-30
[device-hwping-administrator-udpprivate] destination-ip 10.2.2.2
# Configure the destination port on the HWPing server.
[device-hwping-administrator-udpprivate] destination-port 8000
# Configure to make 10 probes per test.
[device-hwping-administrator-udpprivate] count 10
# Set the probe timeout time to 5 seconds.
[device-hwping-administrator-udpprivate] timeout 5
# Start the test.
[device-hwping-administrator-udpprivate] test-enable
# Display test results.
[device-hwping-administrator-udpprivate] display hwping results administrator udpprivate
HWPing entry(admin administrator, tag udpprivate) test result:
Destination ip address:10.2.2.2
Send operation times: 10 Receive response times: 10
Min/Max/Average Round Trip Time: 10/12/10
Square-Sum of Round Trip Time: 1170
Last complete test time: 2000-4-2 8:29:45.5
Extend result:
SD Maximal delay: 0 DS Maximal delay: 0
Packet lost in test: 0%
Disconnect operation number: 0 Operation timeout number: 0
System busy operation number: 0 Connection fail number: 0
Operation sequence errors: 0 Drop operation number: 0
Other operation errors: 0
[device-hwping-administrator-udpprivate] display hwping history administrator udpprivate
HWPing entry(admin administrator, tag udpprivate) history record:
Index Response Status LastRC Time
1 11 1 0 2000-04-02 08:29:45.5
2 12 1 0 2000-04-02 08:29:45.4
3 11 1 0 2000-04-02 08:29:45.4
4 11 1 0 2000-04-02 08:29:45.4
5 11 1 0 2000-04-02 08:29:45.4
6 11 1 0 2000-04-02 08:29:45.4
7 10 1 0 2000-04-02 08:29:45.3
8 10 1 0 2000-04-02 08:29:45.3
9 10 1 0 2000-04-02 08:29:45.3
10 11 1 0 2000-04-02 08:29:45.3
For detailed output description, see the corresponding command manual.
DNS Test
Network requirements
Switch serves as the HWPing client, and a PC serves as the DNS server. Perform a HWPing DNS test
between Switch and the DNS server to test the time required from the client sends a DNS request to it
receives a resolution result from the DNS server.