3com WX3000 Manuel D’Utilisation

 

1-4 

Figure 1-2 Network diagram for static DNS configuration 

10.1 .1.1/24

10 .1.1. 2/ 24

host.com

Host

Switch

 

 

# Configure a mapping between host name host.com and IP address 10.1.1.2. 

<device> system-view 

[device] ip host host.com 10.1.1.2 

# Execute the ping host.com command to verify that the device can use static domain name resolution 

to get the IP address 10.1.1.2 corresponding to host.com. 

[device] ping host.com 

  PING host.com (10.1.1.2): 56  data bytes, press CTRL_C to break 

    Reply from 10.1.1.2: bytes=56 Sequence=1 ttl=127 time=3 ms 

    Reply from 10.1.1.2: bytes=56 Sequence=2 ttl=127 time=3 ms 

    Reply from 10.1.1.2: bytes=56 Sequence=3 ttl=127 time=2 ms 

    Reply from 10.1.1.2: bytes=56 Sequence=4 ttl=127 time=5 ms 

    Reply from 10.1.1.2: bytes=56 Sequence=5 ttl=127 time=3 ms 

 

  --- host.com ping statistics --- 

    5 packet(s) transmitted 

    5 packet(s) received 

    0.00% packet loss 

    round-trip min/avg/max = 2/3/5 ms 

As shown in 

, Switch serving as a DNS client uses dynamic domain name resolution to 

access the host at 3.1.1.1/16 through its domain name host. The DNS server has the IP address 

2.1.1.2/16. The DNS suffix is com. 

Figure 1-3 Network diagram for dynamic DNS configuration 

2.1.1.2/16

2.1.1.1

Switch

1.1.1/16

host. com

IP network

Host

/16

1.

3.1.1.1/ 16