3com WX3000 Manuel D’Utilisation

 

1-4 

Create a Smart Link group 

Add member ports to the Smart Link group 

Configuring a 
Smart Link 
Device 

Enable the function of sending flush messages in the 
specified control VLAN 

Required 

Enable the function of processing flush messages 
received from the specified control VLAN 

Required 

 

A Smart Link device refers to a device on which Smart Link is enabled and a Smart Link group is 

configured, and that sends flush messages from the specified control VLAN. A member port of a Smart 

Link group can be either an Ethernet port or a manually-configured or static LACP aggregation group. 

You can configure a port or a link aggregation group as a member of a Smart Link group. 

Follow these steps to configure Smart Link (with ports as members of the Smart Link group): 

Enter system view 

— 

Create a Smart Link group 
and enter Smart Link group 
view 

smart-link group group-id  

Required 

Enable the function of sending 
flush messages in the 
specified control VLAN 

flush enable control-vlan vlan-id  

Required 

By default, no control 
VLAN for sending 
flush messages is 
specified. 

Smart Link 
group view 

port interface-type interface-number 
{ master | slave } 

interface interface-type interface-number

Configure a 
port as a 
Smart Link 
group 
member 

Ethernet port 
view 

port smart-link group group-id { master 
| slave } 

Required 

Use either approach 

 

Follow these steps to configure Smart Link (with link aggregation groups are members of the Smart Link 

group): 

Enter system view 

— 

Create a Smart Link group and 
enter Smart Link group view 

smart-link group group-id 

Required 

Configure a link aggregation 
group as a member of the 
Smart Link group 

link-aggregation group 
group-id { master | slave } 

Optional