3com WX3000 Manuel D’Utilisation

 

1-5 

Set the PoE mode on the port 
to signal 

Optional 

signal by default. 

 

After the PD compatibility detection function is enabled, the device can detect the PDs that do not 

conform to the 802.3af standard and supply power to them. 

After the PoE feature is enabled, perform the following configuration to enable the PD compatibility 

detection function. 

Follow these steps to configure the PD compatibility detection function: 

Enter system view 

— 

Enable the PD compatibility 
detection function 

Required 

Disabled by default. 

 

The online upgrading of PSE processing software can update the processing software or repair the 

software if it is damaged. Before performing the following configuration, download the PSE processing 

software to the flash of the device . 

Follow these steps to upgrade PSE processing software online: 

Enter system view 

— 

Upgrade the PSE processing 
software online 

poe update { refresh | 
full } filename 

Required 

The specified PSE processing 
software is a file with the 
extension .s19.