3com WX3000 Manuel D’Utilisation

4-7

# Create node 40 with the matching mode being permit in the route policy. Define if-match clauses.

Apply the cost 5 to routes matching the outgoing interface VLAN-interface 6 and ACL 2001.

[SwitchC] route-policy in permit node 40

[SwitchC-route-policy] if-match interface Vlan-interface6

[SwitchC-route-policy] if-match acl 2001

[SwitchC-route-policy] apply cost 5

[SwitchC-route-policy] quit

# Create node 50 with the matching mode being permit, to allow all routing information to pass.

[SwitchC] route-policy in permit node 50

[SwitchC-route-policy] quit

# Configure RIP and apply the route policy in to the incoming routing information.

[SwitchC] rip

[SwitchC-rip] network 1.0.0.0

[SwitchC-rip] network 3.0.0.0

[SwitchC-rip] network 6.0.0.0

[SwitchC-rip] filter-policy route-policy in import

Configuration verification

1) Display data forwarding paths when the main link of the OA server between Switch A and Switch C

works normally.

<SwitchC> display ip routing-table

Routing Table: public net

Destination/Mask Protocol Pre Cost Nexthop Interface

1.0.0.0/8 RIP 100 5 2.2.2.1 Vlan-interface2

2.0.0.0/8 DIRECT 0 0 2.2.2.2 Vlan-interface2

2.2.2.2/32 DIRECT 0 0 127.0.0.1 InLoopBack0

3.0.0.0/8 RIP 100 5 6.6.6.5 Vlan-interface6

6.0.0.0/8 DIRECT 0 0 6.6.6.6 Vlan-interface6

6.6.6.6/32 DIRECT 0 0 127.0.0.1 InLoopBack0

127.0.0.0/8 DIRECT 0 0 127.0.0.1 InLoopBack0

127.0.0.1/32 DIRECT 0 0 127.0.0.1 InLoopBack0

192.168.0.0/24 DIRECT 0 0 192.168.0.39 Vlan-interface1

192.168.0.39/32 DIRECT 0 0 127.0.0.1 InLoopBack0

2) Display data forwarding paths when the main link of the OA server between Switch A and Switch C

is down.