3com WX3000 Manuel D’Utilisation

 

2-7 

For the operation of adding a hybrid port to a VLAN in the untagged way (when forwarding a packet, the 

port removes the VLAN tag of the packet), refer to the section of configuring Ethernet ports in the “Port 

Basic Configuration” part of this manual. 

 

Display the information about the 
protocol-based VLAN 

display vlan [ vlan-id [ to vlan-id ] | all 
| dynamic | static] 

Display the protocol information 
and protocol indexes configured 
on the specified VLAN 

display protocol-vlan vlan { vlan-id 
[ to vlan-id ] | all } 

Display the protocol information 
and protocol indexes configured 
on the specified port  

display protocol-vlan interface 
{ interface-type interface-number [ to 
interface-type interface-number ] | all } 

Available in any view

 

z 

As shown in 

, Workroom connects to the LAN through port GigabitEthernet 1/0/10 on the 

switch. 

z 

IP network and AppleTalk network workstations (hosts) coexist in the Workroom.  

z 

The switch connects to VLAN 100 (using IP network) through GigabitEthernet 1/0/11 and to VLAN 

200 (using AppleTalk network) through GigabitEthernet 1/0/12. 

z 

Configure the switch to automatically assign the IP and AppleTalk packets to proper VLANs for 

transmission, so as to ensure the normal communication between the workstations and servers.  

Figure 2-2 Network diagram for protocol-based VLAN configuration 

VLAN 100

IP Server

VLAN 200

Appletalk Server

Work room

GEth1/0/10

GEth1/0/12

GEth1 /0/11

IP Host

Appletalk Host