3com WX3000 Manuel D’Utilisation

 

1-3 

3)  After the IP phone acquires the IP address assigned by DHCP Server2, the IP phone establishes a 

connection to the NCP specified by DHCP Server1 and downloads corresponding software. After 

that, the IP phone can communicate properly.  

 

z 

An untagged packet carries no VLAN tag. 

z 

A tagged packet carries the tag of a VLAN. 

 

The device determines whether a received packet is a voice packet by checking its source MAC 

address. Packets with their source MAC addresses complying with the configured OUI (organizationally 

unique identifier) addresses are treated as voice packets. Ports receiving packets of this type will be 

added to the voice VLAN automatically for transmitting voice data.  

You can configure OUI addresses for voice packets or specify to use the default OUI addresses. 

 

An OUI address is a globally unique identifier assigned to a vendor by IEEE. You can determine which 

vendor a device belongs to according to the OUI address which forms the first 24 bits of a MAC address. 

The WX3000 supports OUI address mask configuration. You can adjust the matching depth of MAC 

address by setting different OUI address masks. 

 

The following table lists the five default OUI addresses on the device. 

Table 1-1 Default OUI addresses preset on the device 

1 0003-6b00-0000 

Cisco 

phones 

2 

000f-e200-0000 

H3C Aolynk phones 

3 00d0-1e00-0000 

Pingtel 

phones 

4 00e0-7500-0000 

Polycom 

phones 

5 00e0-bb00-0000 

3Com 

phones 

 

A voice VLAN can operate in two modes: automatic and manual. You can configure the operation mode 

for the voice VLAN according to data traffic passing through a port.