3com WX1200 Manuel D’Utilisation
set ip https server
167
set ip https server
Enables the HTTPS server on a wireless LAN switch. The HTTPS server is
required for Web Manager access to the switch.
required for Web Manager access to the switch.
CAUTION: If you disable the HTTPS server, Web Manager access to the
WX switch is also disabled.
WX switch is also disabled.
Syntax —
set ip https server {enable | disable}
enable
— Enables the HTTPS server.
disable
— Disables the HTTPS server.
Defaults — The HTTPS server is disabled by default.
Access — Enabled.
History — The default is changed to disabled in 3.1. In addition, the
HTTPS server is no longer required for WebAAA.
HTTPS server is no longer required for WebAAA.
Examples — The following command enables the HTTPS server on a WX
switch:
switch:
WX1200# set ip https server enable
success: change accepted.
success: change accepted.
See Also
set ip route
Adds a static route to the IP route table.
Syntax —
set ip route {default | ip-addr mask |
ip-addr/mask-length} gateway metric
default
— Default route. A WX switch uses the default route if an
explicit route is not available for the destination.
Default is an alias for IP address 0.0.0.0/0.