3com WX1200 Manuel D’Utilisation
set network-domain peer
281
WX1200# set network-domain mode member seed-ip 192.168.9.254
affinity 7
success: change accepted.
affinity 7
success: change accepted.
See Also
set
network-domain
peer
network-domain
peer
On a Network Domain seed, configures one or more WX switches as
redundant Network Domain seeds. The seeds in a Network Domain share
information about the VLANs configured on the member devices, so that
all the Network Domain seeds have the same database of VLAN
information.
redundant Network Domain seeds. The seeds in a Network Domain share
information about the VLANs configured on the member devices, so that
all the Network Domain seeds have the same database of VLAN
information.
Syntax —
set network-domain peer ip-addr
ip-addr
— IP address of the Network Domain seed to specify as a
peer, in dotted decimal notation.
Defaults — None.
Access — Enabled.
History —Introduced in MSS 4.1.
Usage — This command must be entered on a WX switch configured as
a Network Domain seed.
a Network Domain seed.
Examples — The following command sets the WX switch with IP address
192.168.9.254 as a peer of this Network Domain seed:
192.168.9.254 as a peer of this Network Domain seed:
WX1200# set network-domain peer 192.168.9.254
success: change accepted.
success: change accepted.
See Also