3com WX1200 Manuel D’Utilisation
set {ap | dap} radio radio-profile
343
set {ap | dap} radio
radio-profile
radio-profile
Assigns a radio profile to a MAP radio and enables or disables the radio.
Syntax —
set {ap port-list | dap dap-num | auto} radio {1 |
2} radio-profile name mode {enable | disable}
ap
port-list
— List of ports.
dap
dap-num
— Number of a Distributed MAP.
dap auto
— Sets the radio profile for the MAP configuration profile.
radio 1
— Radio 1 of the MAP.
radio 2
— Radio 2 of the MAP. (This option does not apply to
single-radio models.)
radio-profile
name
— Radio profile name of up to 16 alphanumeric
characters, with no spaces.
mode enable
— Enables radios on the specified ports with the
parameter settings in the specified radio profile.
mode disable
— Disables radios on the specified ports.
Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 3.0. Option auto added for
configuration of the MAP configuration profile.
configuration of the MAP configuration profile.
Usage — When you create a new profile, the radio parameters in the
profile are set to their factory default values.
profile are set to their factory default values.
To enable or disable all radios that use a specific radio profile, use set
radio-profile.
radio-profile.
Examples — The following command enables radio 1 on ports 3
through 6 assigned to radio profile rp1:
through 6 assigned to radio profile rp1:
WX1200# set ap 3-6 radio 1 radio-profile rp1 mode enable
success: change accepted.
success: change accepted.
See Also