3com 4500 26-PORT Manuel D’Utilisation
RSTP Configuration Commands
223
Parameter
stp:
Specifies to run Spanning Tree in STP compatible mode.
rstp:
Specifies to run Spanning Tree in RSTP mode.
Description
Use the
stp mode
command to configure Spanning Tree’s running mode.
Use the
undo stp mode
command to restore the default Spanning Tree’s running
mode.
By default, the value is rstp.
This command can be used for specifying the current Ethernet Switch to run the
Spanning Tree in RSTP mode or in STP compatible mode.
Spanning Tree in RSTP mode or in STP compatible mode.
Related commands:
stp
,
stp mcheck
.
Example
To set Spanning Tree to work in STP compatible mode, enter the following:
<4500>system-view
System View: return to User View with Ctrl+Z.
[4500]stp mode stp
stp pathcost-standard
Syntax
stp pathcost-standard { dot1d-1998 | dot1t }
undo stp pathcost-standard
View
System view
Parameter
dot1d-1998:
The Switch calculates the default Path Cost of a port by the IEEE
802.1D-1998 standard.
dot1t:
The Switch calculates the default Path Cost of a port by the IEEE 802.1t
standard.
Description
Use the
stp pathcost-standard
command to specify the standard to be used by
the Switch in calculating the default Path Cost.
Use the
undo stp pathcost-standard
command to restore the default choice of
the standard.
By default, the Switch calculates the default Path Cost of a port by the IEEE 802.1t
standard.
standard.
Example
To configure the Switch to calculate the default Path Cost of a port by the IEEE
802.1D-1998 standard, enter the following:
802.1D-1998 standard, enter the following: