3com 4500 50-PORT Manuel D’Utilisation
50
C
HAPTER
2: U
SING
P
ORT
C
OMMANDS
[4500-Ethernet1/0/1]duplex auto
flow-control
Syntax
flow-control
undo flow-control
View
Ethernet Port View
Parameters
None
Description
Use the
flow-control
command to enable flow control on an Ethernet port. This
avoids discarding data packets due to congestion. Use the
undo flow-control
command to disable flow control.
By default, flow control is disabled.
Example
To enable flow control on port “Ethernet1/0/1”, enter the following.
<4500>system-view
System View: return to User View with Ctrl+Z.
[4500]interface ethernet 1/0/1
[4500-Ethernet1/0/1]flow-control
[4500-Ethernet1/0/1]
interface
Syntax
interface interface_type interface_num | interface_name
View
System View
Parameter
interface_type:
Enter the interface type. This can be either
Aux
,
Ethernet
,
GigabitEthernet
,
NULL, Vlan-interface
.
interface_number
: Enter the interface number in the format
unit-number/0/port-number.
The unit number is a number in the range 1 to 8.
The port number is a number in the range 1 to 28 or 1 to 52 depending on the
number of ports you have on your unit.
number of ports you have on your unit.
You can use the
interface_name
at this command. This consists of the
interface_type
and the
interface_number
combined as a single parameter. For
example Ethernet1/0/1.