Enterasys Networks CSX6000 Mode D'Emploi

Central Site Remote Access Switch      477

LCD M

ESSAGES

LCD Message Groups

System unable to access file. Check for one of the following log error messages: 

Error opening file <file name>

Error reading file <file name>, section = <section name>

Error opening file <file name>, slot <slot #>

Read 0 bytes from file <file name> for WAN card in slot <slot #>

Failure during read of file <file name> for WAN card in slot <slot #>

Error closing file <file name>, slot <slot #>

Error closing password data file

Error opening password data file

Failure on closure of file <file name>

Failure opening file <file name>

Failure on file closure <file name>

Failure on write of file <file name>

If you see any of the above log messages repeatedly, there may be a problem with your hard drive. 
Contact your Distributor or Customer Support.

LAN connection failure. Hardware failure detected on the Ethernet LAN adapter. Check for one of 
the following log error messages:

Manual intervention required: please replace LAN card

Lan Adapter HW upgrade required

Lan Adapter HW upgrade may be required

With any of the above messages, refer to the 

 chapter for specific error message 

resolution.

LAN connection failure. Initialization failure detected by the LAN packet forwarding component 
in the system.

LAN connection failure. LAN packet transmit error detected by the system.

ISDN line failure. The data link for the line connected to slot “s” port “p” is down.

LAN HW Error

LAN Init Error

LAN Xmit Error

Line (s,p) Down