Samsung MCC8 Manuel D’Utilisation

C

HAPTER 

3:

 

O

NE

-T

IER 

C

ONFIGURATION

 9 

3.  To select a computer: 

ƒ  Use the <Page Up>/<Page Down> or <Ç>/<È> keys to highlight the desired computer and 

press <Enter> 

OR 

ƒ  When the Selection Menu is sorted by Channel ID, press the desired computer's Key number 

(shown in the left-hand column); 

ƒ  When the Selection Menu is sorted by name (arranged alphabetically), use the <Page 

Up>/<Page Down> or <Ç>/<È> keys, or type the first character(s) of the desired Name to 
quickly jump to the Name that most closely matches what you type. To back up a character, 
press the <Backspace> key. Highlight the desired computer, and press <Enter>. 

a.  When you select a computer, you automatically return to normal computer operation at 

the selected computer. 

b.  The light above the selected Channel button turns from amber to green, and the monitor 

displays video from the selected computer. 

c.  The Channel ID and Name will be displayed on the monitor for the time interval specified 

in the Configuration Menu. 

d. Press 

<Home> at any time to return to the first page of the Configuration Menu (for 16-

channel or two-tier systems). 

Setting AutoScan 
AutoScan activation shortcut: Activate the On-Screen User Interface and press the <F6> Key. 
The green light next to the <Scan> button on the front panel will be ON and the unit will scan 
according to the parameters set in the Configuration Menu. 

 

Operation: Using Front Panel Buttons  

When the on-screen user interface is not activated, you can operate MasterConsole II from the 
front panel. 

The front panel has a [Scan] button, a [Skip] button, and a series of numbered buttons used to 
select channels and to set the Global scan rate.   

 

 

1.  To select a computer: 

a.  Be sure the green light next to the [Scan] button is OFF (toggle ON/OFF).  

b.  Press the numbered button corresponding to desired channel.