Sony 9000 Manuel D’Utilisation
279
Key Setting Operations Using Menus
Chapt
er
4
K
e
y
s
1
In the Edge menu, press [Zabton], turning it on.
2
Adjust the following parameters.
Note
If in the pattern selection described below you select “Mask Pattern,” and
“Box” for the main mask, the “Size” parameter here cannot be adjusted.
Set “Size” in the Main Mask menu.
“Box” for the main mask, the “Size” parameter here cannot be adjusted.
Set “Size” in the Main Mask menu.
3
To adjust the pattern and color, press [Zabton Adjust].
The Zabton Adjust menu appears.
4
In the <Zabton Pattern> group, select the pattern.
Key Wipe: Use a key wipe.
Edge Pattern: Use a color mixing pattern for key edge.
Mask Pattern: Use the main mask Box or Pattern.
Edge Pattern: Use a color mixing pattern for key edge.
Mask Pattern: Use the main mask Box or Pattern.
5
To adjust the color, press [Zabton Color] and adjust the following
parameters.
parameters.
Masks
There are two masks, which can be used to mask off unneeded parts of a key
or background, or to remove defects, and these are known as the main mask and
subsidiary mask. You can either use the main mask and subsidiary mask
independently, or at the same time.
or background, or to remove defects, and these are known as the main mask and
subsidiary mask. You can either use the main mask and subsidiary mask
independently, or at the same time.
For an overview of the masks, see page 53.
Knob
Parameter
Adjustment
Setting values
1
Size
Pattern size
0.00 to 100.00
2
Soft
Pattern edge softness
0.00 to 100.00
3
Density
Density
0.00 to 100.00
Knob
Parameter
Adjustment
Setting values
1
Luminance
Luminance
0.00 to 100.00
2
Saturation
Saturation
0.00 to 100.00
3
Hue
Hue
359.99 to 0.00
4
Density
Density
0.00 to 100.00