Sony 9000 Manuel D’Utilisation
Chap
te
r 4
K
e
y
s
290
Key Setting Operations With the Key Control Block
When [Mix Color] is selected in the key fill Matte Adjust menu, you can
further adjust color 2.
further adjust color 2.
When [Mix Color] is on, and the [MORE] button is lit amber
When [Mix Color] is on, and the [MORE] button is lit green
When using the key fill bus signal: Press the [MATTE FILL] button, turning
it off. To select the key fill signal, use the key 1 or key 2 bus buttons in the
cross-point control block.
To select the key fill signal for key 3 or key 4 in the cross-point control
block, press the [KEY3] button or [KEY4] button to the right of the key
bus buttons, turning it on, to allocate the key 1 bus row or key 2 bus row
to the key 3 fill or key 4 fill, then press the desired cross-point button.
cross-point control block.
To select the key fill signal for key 3 or key 4 in the cross-point control
block, press the [KEY3] button or [KEY4] button to the right of the key
bus buttons, turning it on, to allocate the key 1 bus row or key 2 bus row
to the key 3 fill or key 4 fill, then press the desired cross-point button.
Selecting key source
• To use the key source paired with the key fill signal selected on the key fill
bus, press the [AUTO SEL] button, turning it on. The pairing of the cross-
point buttons for key fill and key source is carried out in the Setup menu. (See
“Cross-Point Settings (Xpt Assign Menu)” in Chapter 16 (Volume 2).)
point buttons for key fill and key source is carried out in the Setup menu. (See
“Cross-Point Settings (Xpt Assign Menu)” in Chapter 16 (Volume 2).)
• To select key source independently of the key fill signal selected on the key
fill bus and paired with key source, hold down the [SPLIT] button, turning it
on, then press the desired Key 1 or Key 2 button in the cross-point control
block.
on, then press the desired Key 1 or Key 2 button in the cross-point control
block.
• To use as key source the same signal as the key fill signal selected on the key
fill bus, select the SELF mode by pressing the [AUTO SEL] button and
[SPLIT] button simultaneously so that both are off. When chroma key is
selected as the key type, select the SELF mode.
[SPLIT] button simultaneously so that both are off. When chroma key is
selected as the key type, select the SELF mode.
3
Hue
Color 1 hue
359 to 0
Knob
Parameter
Adjustment
Setting values
Knob
Parameter
Adjustment
Setting values
1
Luminance
Color 1 luminance
0 to 100
2
Saturation
Color 1 saturation
0 to 100
3
Hue
Color 1 hue
359 to 0
4
Size
Pattern size
0 to 100
Knob
Parameter
Adjustment
Setting values
1
Luminance
Color 2 luminance
0 to 100
2
Saturation
Color 2 saturation
0 to 100
3
Hue
Color 2 hue
359 to 0
4
Soft
Edge softness
0 to 100