Sony 9000 Manuel D’Utilisation
Ch
apt
apt
er 5
Wip
e
s
306
Basic Procedure for Wipe Settings
• When a random wipe is selected (pattern number 273)
• When a diamond dust wipe is selected (pattern number 274)
Note
When Flash Rate is set to 0.00, you cannot change the pattern. In this state,
adjusting H Size or V Size has no effect on the pattern.
adjusting H Size or V Size has no effect on the pattern.
For details of a pattern mix, see the next section.
For details of applying pattern modifiers, see “Setting Wipe Modifiers”
(page 309).
For details of applying pattern modifiers, see “Setting Wipe Modifiers”
(page 309).
Selecting a wipe pattern in the Flexi Pad control block
To select a pattern with a standard type Flexi Pad control block, use the
following procedure. (It is not possible to select a wipe pattern with a simple
type Flexi Pad control block.)
following procedure. (It is not possible to select a wipe pattern with a simple
type Flexi Pad control block.)
1
In the M/E-1 Flexi Pad control block, press the [WIPE] button.
This switches the Flexi Pad control block to wipe snapshot mode.
Knob
Parameter
Adjustment
Setting values
1
H Size
Tile width
0.00 to 100.00
2
V Size
Tile height
0.00 to 100.00
3
Volatility
Rate of tile generation
0.00 to 100.00
Knob
Parameter
Adjustment
Setting values
1
H Size
Particle width
0.00 to 100.00
2
V Size
Particle height
0.00 to 100.00
3
Flash Rate
Rate of generation of particles
0.00 to 100.00