Sony 9000 Manuel D’Utilisation
Chap
te
r 7
F
rame
Me
mor
y
350
Frame Memory Operations
To the right of the button is shown the current frame memory output signal,
input signal, and processing background signal status.
<Out>: output signal status
input signal, and processing background signal status.
<Out>: output signal status
Blk: when black signal is output
Thr: when input image is output
Frz: when a freeze is output
Fil: when still image file is output
Com: when image is processed
Thr: when input image is output
Frz: when a freeze is output
Fil: when still image file is output
Com: when image is processed
<FG>: input signal status
FMS: frame memory source
Col: color matte signal
Col: color matte signal
<BG>: processing background signal status
Blk: black signal
Stl: still image (freeze image or still image file)
Stl: still image (freeze image or still image file)
d Enable status display
Off: Both Freeze Enable and Edit Enable are off.
Frz: Freeze Enable is on.
Edt: Edit Enable is on.
Off: Both Freeze Enable and Edit Enable are off.
Frz: Freeze Enable is on.
Edt: Edit Enable is on.
e Reposition/Lock status display
These appear for frame memory outputs (FM1 to FM8) when reposition (see
page 360) or lock (see page 361) is currently applied.
These appear for frame memory outputs (FM1 to FM8) when reposition (see
page 360) or lock (see page 361) is currently applied.
f Pair button
Press this button, turning it on, to enable pair mode.
Press this button, turning it on, to enable pair mode.
g <Select> group
Select the output to which operations apply.
Select the output to which operations apply.
Selecting an Input Image
For the input image to frame memory, you can use either the signal selected on
one of the two frame memory source buses or a dedicated color matte signal.
When using the signal on frame memory source bus 1 or 2 for the input image,
select the signal as described below.
one of the two frame memory source buses or a dedicated color matte signal.
When using the signal on frame memory source bus 1 or 2 for the input image,
select the signal as described below.
For the method of using a color matte signal, see “Freezing an image and
writing it to memory” (page 352).
writing it to memory” (page 352).
Selecting the signal on a frame memory source bus
As an example, to select a signal on frame memory source bus 1, use the
following procedure.
following procedure.