Sun Microsystems 816-0830-12 Manuel D’Utilisation
42
Sun StorEdge Network FC Switch-8 and Switch-16 Installation and Configuration Guide • October 2001
Attaching the Mounting Rails to the
Expansion Cabinet
Expansion Cabinet
The 8-port switch comes with a set of mounting rails that holds two switches. The
16-port switch comes with individual rails for each switch.
16-port switch comes with individual rails for each switch.
This section describes how to attach the mounting rails to an expansion cabinet for
two-switch and four-switch configurations.
two-switch and four-switch configurations.
Installing the Mounting Rails for 8-Port Switches
▼
To Attach Mounting Rails for Two 8-port
Switches
Switches
1. Before you install the rails into the cabinet, loosely start two stopper screws into
each mounting rail. (
).
2. Working from the back of the cabinet, loosely start two screws into the cabinet
rails. (
.)
Refer to the Rackmount Placement Matrix for the locations of the screw holes of your
configuration.
configuration.