Avaya C360 Manuel D’Utilisation

 10

Avaya C360 Manager User Guide

The Get/Set Toolbar provides buttons for getting and setting configuration 
parameters for selected ports and LAGs. When a port or LAG is selected, 
its configuration is reflected on the Get/Set Toolbar. Each group of buttons 
represents the various possible states of a configuration parameter. For 
example, the first group of buttons represents the possible speed of a 
port - 10 Mbps, 100 Mbps, or 1000 Mbps. If the center button is 
depressed, the port is currently configured to operate at 100 Mbps. 

Selected ports and LAGs can be configured using the Get/Set Toolbar. To 
change the configuration of a port or LAG, click the button which 
represents the value of the parameter you want to apply to the port or 
LAG. Click 

 to update the device with the changes. Click 

 to 

discard the changes. Options not applicable to the selected port or LAG 
are dimmed.

To configure the ports of a LAG, select the LAG icon in the Tree View or 
the Chassis View. Ports belonging to a LAG may not be configured by 
selecting the port.

Multiple ports and LAGs can be simultaneously configured using the 
Get/Set Toolbar. When multiple ports or LAGs with non-identical 
configurations are selected, only the parameters whose settings are 
identical on the selected ports or LAGs are reflected in the Get/Set 
Toolbar. For example, if a port operating at full duplex and a port 
operating at half duplex are selected, neither of the duplex mode buttons 
on the Get/Set Toolbar are depressed.

The table below displays the buttons on the Get/Set Toolbar and explains 
their functions and settings.

Get and set the port/LAG’s speed: 10 Mbps, 100 
Mbps, 1000 Mbps.

Get and set the port/LAG’s status: Enabled, Disabled.

Get and set the port/LAG’s mode: Half duplex, Full 
duplex.

Get and set the port/LAG’s auto-negotiation status: 
Auto-negotiation Enabled, Auto-negotiation 
Disabled.

Get and set the port/LAG’s STP mode: Enabled, 
Disabled.