Avaya C360 Manuel D’Utilisation
Chapter 7
84
Avaya C360 Manager User Guide
Viewing Channel Group Information
The Channel Group dialog box contains provide information specific to a
selected Channel Group. The tabs that appear in the Channel Group
dialog box are dependant on the encapsulation method of the selected
Channel Group.
selected Channel Group. The tabs that appear in the Channel Group
dialog box are dependant on the encapsulation method of the selected
Channel Group.
To view the Channel Group dialog box for a specific Channel Group:
1. Click a Channel Group symbol in the Chassis View. A list of
Channel Groups appears.
2. Click the Channel Group for which you want to view information.
The Channel Group dialog box for the selected Channel Group
opens.
opens.
* Note: Clicking
New
opens the Channel Group wizard, enabling
creation of a new Channel Group on the selected port. For
information about the Channel Group Wizard, refer to
information about the Channel Group Wizard, refer to
Channel Group - PPP Session Information
The Channel Group dialog box for Channel Groups using PPP Sessions
contains three tabs:
contains three tabs:
•
- Basic information about the Channel Group.
•
- Information about the channels that comprise the
Channel Group.
•
- Information about PPP on the Channel Group.
Loopback status
The type of loopback currently used by the port.
Possible values are:
Possible values are:
• Near End Payload
• Near End Line
• Near End Inward
• Far End Payload
• Far End Line
Fault Messages
Any faults that occurred on the port.
Table 7-1. E1/T1 Port Configuration Parameters (Continued)
Field
Description