Avaya ELAT Manuel D’Utilisation

ExpertNet Lite Assessment Tool - User Guide

Steps 2.1 and 2.2 will only display if you selected the Discover Topology option.

Select this option if you want the Controller to discover network 

topology from scratch. Steps 2.1 and 2.2 in the Configuration Wizard 

are enabled. You must have SNMP access to network routers to use 

this option.

Select this option if you want the Controller to reuse the existing 

topology file from a previous discovery.

Select this option if you do not want to (or cannot) discover network 

paths. The Network Tests > Discover Ping Tests entry in the main 

menu bar will be disabled, but you will still be able to add Ping tests 

manually. You may want to consider this option if SNMP access to 

network routers is not allowed.

Select this option if you want the Controller to use the default gateway 

configured on the Controller PC to start network discovery from.

Select this option if you want the Controller to use a specified initial 

gateway to start network discovery from.