Avaya C460 Manuel D’Utilisation

Chapter 2        Avaya C460 CLI Commands

90

Avaya C460 Reference Guide

User level: read-write, admin.
Use the set interface inband command to configure the inband interface on 
the Supervisor Module.

The syntax for this command is:

 <vlan> <ip_addr> <netmask>

Example:
To configure the inband interface on VLAN 1, IP address 1.1.1.1 and netmask 
255.255.255.0:

User level: read-write, admin.
Use the set interface outband command to configure the outband interface 
on the supervisor Module.

The syntax for this command is:

 <ip_addr> <netmask>

Example:

vlan

The number of the VLAN to be assigned to the interface

ip_addr

IP address

netmask

Subnet mask

C460-1# set interface inband 1 1.1.1.1 255.255.255.0 

This command will RESET the device

*** Reset *** - do you want to continue (Y/N)? y

ip_addr

IP address

netmask

Subnet mask