Avaya C460 Manuel D’Utilisation
Chapter 2 Avaya C460 CLI Commands
124
Avaya C460 Reference Guide
The syntax for this command is:
set ppp incoming timeout
<time>
Example:
qset radius authentication enable/disable
User level: read-write, admin.
Enables or disables RADIUS authentication for the C460 switch.
Enables or disables RADIUS authentication for the C460 switch.
The syntax for this command is:
set radius authentication {enable | disable}
Example:
set radius authentication retry-number
User level: read-write, admin.
Sets the number of times an access request is sent when there is no response.
Sets the number of times an access request is sent when there is no response.
The syntax for this command is:
set radius authentication retry-number
<number>
Example:
time
The timeout in minutes
C460-1# set ppp incoming timeout 15
PPP incoming session will automatically disconnect after 15
minutes of idle time
enable
Enable RADIUS authentication
disable
Disable RADIUS authentication (default)
C460-1(super)# set radius authentication enable
number
Number of retries
C460-1(super)# set radius authentication retry-number 3