Avaya C460 Manuel D’Utilisation
Chapter 2 Avaya C460 CLI Commands
130
Avaya C460 Reference Guide
Example:
To enable SNMP ConfigChange traps to a specific manager:
To enable SNMP ConfigChange traps to a specific manager:
Example:
To enable all traps to a specific manager:
To enable all traps to a specific manager:
Example:
To disable SNMP config traps to a specific manager:
To disable SNMP config traps to a specific manager:
Example:
To add an entry in the SNMP trap receiver table with default:
To add an entry in the SNMP trap receiver table with default:
set snmp trap auth
User level: read-write, admin.
Use the set snmp trap auth command to enables or disable the sending of
SNMP traps upon SNMP authentication failure.
Use the set snmp trap auth command to enables or disable the sending of
SNMP traps upon SNMP authentication failure.
The syntax for this command is:
set snmp trap
{enable|disable} auth
Example:
C460-1# set snmp trap 192.168.173.42 enable config
SNMP config change traps enabled.
C460-1# set snmp trap 192.168.173.42 enable all
SNMP all traps enabled.
C460-1# set snmp trap 192.168.173.42 disable config
SNMP config traps disabled.
C460-1# set snmp trap 192.168.173.42
SNMP trap receiver added.
C460-1# set snmp trap enable auth
Authentication trap enabled