Avaya C460 Manuel D’Utilisation

Chapter 2        Avaya C460 CLI Commands

Avaya C460 Reference Guide

31

User level: read-write, admin.
L You can only access this command in the RIP context 

Type router rip at the command prompt to enter interface mode if 
necessary.

Use the default metric command to set the interface RIP route metric. 
Use the no default metric  command to restore the default value. 
The default metric is 1.

The syntax for this command is:

<number>

Example:

User level: read-write, admin.
Use the disable interface command to disables the inband or outband 
interface.

The syntax for this command is:

 [outband | inband]

Example:

number

The interface RIP route metric value. The range is 1 to 15.

Router-1 (configure router:rip) # default metric 10

Done!

outband

Disables the outband interface

inband

Disables the inband interface

C460-1# disable interface outband

You must reset the device in order for the change to take 

effect.