Avaya C460 Manuel D’Utilisation

Chapter 2        Avaya C460 CLI Commands

46

Avaya C460 Reference Guide

User level: read-write, admin.
L You can only access this command in Interface mode. 

Type interface [name] at the command prompt to enter Interface mode if 
necessary.

Use the ip bootp-dhcp server command to add a bootp/dhcp server to 
handle bootp/dhcp requests received by this interface. 
Use the  no ip bootp-dhcp server  command to remove the server. A 
maximum of two servers can be added to a single interface. 

The syntax for this command is:

<ip-address>

Example:
To add station 192.168.37.46 as a bootp/dhcp server to handle bootp/dhcp requests 
arriving at the interface “marketing”:

User level: read-write, admin.
L You can only access this command in interface mode. 

Type interface [name] at the command prompt to enter interface mode.

Use the ip broadcast command to update the interface broadcast address. The 
Broadcast address must be filled in with 0s or 1s.

The syntax for this command is:

 <bc addr>

Example:

ip-address

The IP address of the server.

Router-1(configure-if:marketing) # ip bootp-dhcp server 

Done!

bc addr

The broadcast IP address

Router-1(config-if:marketing)#ip broadcast address