Avaya C460 Manuel D’Utilisation
Chapter 2 Avaya C460 CLI Commands
Avaya C460 Reference Guide
63
The syntax for this command is:
[no] ip vrrp
<vr-id> address <ip-address>
Example:
To assign address 10.0.1.2 to virtual router 1:
To assign address 10.0.1.2 to virtual router 1:
ip vrrp auth-key
User level: read-write, admin.
L You can only access this command in Interface mode.
L You can only access this command in Interface mode.
Type interface [name] at the command prompt to enter Interface mode if
necessary.
necessary.
Use the ip vrrp auth-key command to set the virtual router simple password
authentication for the virtual router ID.
Use the no ip vrrp auth-key command to disable simple password
authentication for the virtual router instance.
authentication for the virtual router ID.
Use the no ip vrrp auth-key command to disable simple password
authentication for the virtual router instance.
The syntax for this command is:
[no] ip vrrp
<vr-id> auth-key <key-string>
ip vrrp override addr owner
User level: read-write, admin.
L You can only access this command in Interface mode.
L You can only access this command in Interface mode.
Type interface [name] at the command prompt to enter Interface mode if
necessary.
necessary.
Use the ip vrrp override addr owner command to accept packets
addressed to the IP address(es) associated with the virtual router, such as ICMP,
SNMP, and TELNET (if it is not the IP address owner).
Use the no ip vrrp override addr owner command to discard these packets.
addressed to the IP address(es) associated with the virtual router, such as ICMP,
SNMP, and TELNET (if it is not the IP address owner).
Use the no ip vrrp override addr owner command to discard these packets.
vr-id
Virtual Router ID (1-255)
ip-address
The IP address to be assigned to the virtual router.
Router-1(configure-if:marketing) # ip vrrp 1 address
10.0.1.2
Done!
vr-id
Virtual Router ID (1-255)
key-string
Simple password string.