Avaya C460 Manuel D’Utilisation
Chapter 2 Avaya C460 CLI Commands
Avaya C460 Reference Guide
71
ping
User level: read-only, read-write, admin.
Use the ping command to send ICMP echo request packets to another node on the
network.
Use the ping command to send ICMP echo request packets to another node on the
network.
The syntax for this command is:
ping
[host]
Example: to ping the IP number 149.49.48.1:
ping (Layer 3)
User level: user, privileged, supervisor
Use the ping command to send ICMP echo request packets to another node on the
network.
Use the ping command to send ICMP echo request packets to another node on the
network.
The syntax for this command is:
ping <host> [<interval> [<size> [<timeout> [<source
address>]]]]]
host
Host IP address/Internet address of route destination.
If you do not specify a host IP, then the last host IP is used.
If you do not specify a host IP, then the last host IP is used.
C460-1> ping 149.49.48.1
149.49.48.1 is alive
host
Host IP address/Internet address of route destination. If missing
then the last host IP is used.
then the last host IP is used.
interval
Interval between ping commands in seconds (1 to 256)
size
Size of packet in bytes (22 to 66500)
timeout
Timeout in seconds (1 to 10)
source
address
address
IP address of one of the router interfaces