Avaya C460 Manuel D’Utilisation
Chapter 2 Avaya C460 CLI Commands
82
Avaya C460 Reference Guide
Example:
set boot bank
User level: read-write, admin.
Use the set boot bank command to set the system boot bank (for the active
Supervisor Module).
Use the set boot bank command to set the system boot bank (for the active
Supervisor Module).
The syntax for this command is:
set boot bank
<value>
Example:
set broadcast storm control
User level: read-write, admin.
Use the set broadcast storm control command to enable or disable
broadcast storm control.
Use the set broadcast storm control command to enable or disable
broadcast storm control.
The syntax for this command is:
set broadcast storm control
<enable|disable>
Example:
C460-1# set arp-tx-interval 15
ARP tx interval was set to 15 seconds.
value
• bank-a – set the boot bank to A
• bank-b – set the boot bank to B
• bank-b – set the boot bank to B
C460-1# set boot bank A
boot bank is A
enable
Enable broadcast storm control
disable
Disable broadcast storm control
C460-1# set broadcast storm enable
Done!