Avaya P332MF Manuel D’Utilisation

Chapter 6

CLI – Layer 2

106

Avaya P332MF User’s Guide

Use the

 set port redundancy 

command to define/delete port redundancy 

schemes between a Primary and a Secondary link. There should not be any 
redundancy scheme already defined on any of the links. 

The syntax for this command is:

set port redundancy <mod_num>/<prim_port_num> <mod_num>/

<second_port_num> {on/off} [<redundancy_name>]

Output Example:

P330-N# set port redundancy 1/7 2/12 on red1

uplink: Port 2/12 is redundant to port 1/7.

Port redundancy is active - entry is effective immediately

If you wish to define a name which includes spaces, you must enclose the 

entire name in quotation marks, e.g. "new york".

Use the

 set port redundancy 

commands to activate or disable all defined port 

redundancy schemes within the stack. This command will not delete existing port 
redundancy entries. A port redundancy scheme is removed once the switch 
containing either its primary or secondary ports is removed from the stack. 

You must disable Spanning Tree before you can enable redundancy.

The syntax for this command is:

set port redundancy {enable|disable}

Output Example:

P330-N# set port redundancy enable

All redundancy schemes are now enabled

prim_port_num

Primary link of the redundancy scheme

second_port_num

Secondary link of the redundancy scheme

redundancy_name

Name for the redundancy scheme (optional)