Avaya P332MF Manuel D’Utilisation
Chapter 6
CLI – Layer 2
50
Avaya P332MF User’s Guide
show port
Use the
show port
command to display port status.
The syntax for this command is:
show port [<mod_num>[/<port_num>]]
Output Example:
To display the status for port 4 on switch 3:
To display the status for port 4 on switch 3:
P330-N> show port 3/4
Port Name Status Vlan Level Neg Dup. Spd. Type
------ ------- --------- ---- ------ ------- ---- ---- -------------
3/4 John connected 1 4 enable half 10M 100/1000Base-Tx
Show Port Output Fields
mod_num
(Optional) Number of the switch. If you do not specify a
number, the ports on all switches are shown.
number, the ports on all switches are shown.
port_num
(Optional) Number of the port on the switch. If you do not
specify a number, all the ports on the switch are shown.
You can also specify a range of ports separated by a dash, e.g.,
5-13 for ports 5 to 13.
specify a number, all the ports on the switch are shown.
You can also specify a range of ports separated by a dash, e.g.,
5-13 for ports 5 to 13.
Field
Description
Port
Switch and port number
Name
The name you assigned to the port
Status
Status of the port (connected, no link, disabled, no Rmt Lnk)
VLAN
VLAN ID of the port
Level
Priority level of the port (0-7)
Neg
The autonegotiation status of the port (enable, disable)
Duplex
Duplex setting for the port (fdx, hdx)
Speed
Speed setting for the port (10, 100)