Avaya P332MF Manuel D’Utilisation

Chapter 6

CLI – Layer 2

Avaya P332MF User’s Guide

57

Use the s

how port self-loop-discovery 

command to display which port or 

switch has an enabled IBM™ token ring cable loop discovery status.

This command is not supported by the P330-ML switches.

If this command is to be implemented on a switch other than the stack master, 

a session should be opened to the relevant switch.

The syntax for this command is:

show port self-loop-discovery [module num/port number]

Output Example:

P330-N> show port self-loop-discovery 1/5

Self-Loop-Discovery is enabled on port 1/5.

The 

show internal buffering

 command displays the size options (Maximum, 

Minimum, or Medium) of the Receive (Rx) buffer allocated to each port of the 
specified switch.

The syntax for this command is:

show internal buffering [<mod_num>]

Output Example:

P330-N> show internal buffering 1

Module  Internal Buffer

------  ---------------

  1          med   

Internal buffering for the P330-ML switches will always have the value  

Not 

supported

. This command is used to display the internal buffering  status for the 

other P330 switches in the stack.