Avaya P130 Manuel D’Utilisation

Chapter 6        Avaya P130 CLI

Avaya P130 User’s Guide

121

Use the

 ip access-list command to create a specific policy rule. This 

command defines a policy rule. The access list contains several of these rules. Each 
rule pertains to the source IP address, the destination IP address, the protocol, the 
protocol ports (if relevant), and to the ACK bit (if relevant). To delete a specific rule, 
use the no form of this command.

The syntax for this command is:
[no] [ip] access-list <access-list-number> <access-list-index> 
                    <command> <protocol> {<source-ip>  
                    <source-wildcard> | any |host  
                    <source-ip>}[<operator> <port> [<port]] 
                    {<destination-ip> <destination- 
                      wildcard>|any |host  
                    <destination-ip>}[<operator> <port> 
                   [<port>]][established] [precedence]

Example:
P130-1# ip access-list 100 2 fwd5 tcp  host 149.49.0.0 host 
157.48.0.0

Example:
P130-1# ip access-list 100 3 fwd7 udp any any eq 25

<access-list-number>

Integer (100..199)

<access-list-index>

Integer (1...9999)

<command>

permit | deny | deny-and-notify | fwd0-7

<protocol>

ip | tcp | udp | integer (1..255)

<source-ip>

IP network

<source-wildcard> 

IP network wildcard

<operator>

eq | lt | gt | range

<port> Integer 

(1..65535)

<destination-ip> IP 

network

<destination-wildcard>

IP network wildcard

<precedence>

mandatory | optional]