Avaya P130 Manuel D’Utilisation

Chapter 6        Avaya P130 CLI

Avaya P130 User’s Guide

53

Use the 

show keep alive command to view the keep alive interval. 

The time value is in seconds.

The syntax for this command is:
show keep alive

Example:
P130-1# show keep alive 
Keep Alive interval is: 5          

Use the 

show timeout command to display the amount of time the CLI can 

remain idle before timing out in minutes. If the result is 0, there is no timeout limit.

The syntax for this command is:
show timeout

Example:
P130-N> show timeout
CLI timeout is 10 minutes

Use the 

set logout command to set the number of minutes until the system 

automatically disconnects an idle session.

The syntax for this command is:
set logout <timeout> 

Example:

To set the number of minutes until the system disconnects an idle session 
automatically:
P130-1# set logout 20
Sessions will be automatically logged out after 20 minutes of 
idle time.

<timeout>

Number of minutes (0 to 999) until the system automatically 
disconnects an idle session. Setting the value to 0 disables the 
automatic disconnection of idle sessions (default is 15 minutes).