Avaya P130 Manuel D’Utilisation

Chapter 6        Avaya P130 CLI

Avaya P130 User’s Guide

73

Use the 

set port speed command to configure the speed of a port or range of 

ports.
In autonegotiation mode, the port's speed is determined by autonegotiation. You 
cannot set the speed type to 10 or 100 when autonegotiation is enabled.

The syntax for this command is: 
set port speed <mod_num/port_num><speed>

Example:

To configure port 2 on module 1 port speed to 10 Mbps:
P130-1# set port speed 1/2 10MB
Port 1/2 speed set to 10 Mbps.

Use the 

set port duplex command to configure the duplex type of an Ethernet 

or Fast Ethernet port or range of ports.
You can configure Ethernet and Fast Ethernet interfaces to either full duplex or half 
duplex. The duplex status of a port in autonegotiation mode is determined by 
autonegotiation. An error message is generated if you attempt to set the 
transmission type of autonegotiation Fast Ethernet ports to half- or full-duplex 
mode.

The syntax for this command is: 
set port duplex <mod_num/port_num> {full | half}

mod_num

Module number 

port_num

Number of the port on the module 

<speed>

Set port speed to 10, or 100 Mbps

mod_num

Module number 

port_num

Number of the port on the module 

full

Keyword to specify full-duplex transmission

half

Keyword to specify half-duplex transmission