Avaya P334T-ML Manuel D’Utilisation

Chapter 8        User Authentication

50

Avaya P334T-ML User’s Guide

The following RADIUS commands are accessible from Supervisor level.

For a complete description of the RADIUS CLI commands, including syntax and 
output examples, refer to Avaya P330: Reference Guide.

Telnet Client Support

The P330ML supports invocation of a Telnet client from the CLI. The Telnet client 
implementation enables you to control the destination port for connecting daemons 
that listen on a non-default port.
Authentication when connecting to the switch via Telnet is identical to standard 
console connection authentication (local or RADIUS).

In order to...

Use the following command...

Enable or disable authentication for 
the P330 switch. RADIUS 
authentication is disabled by 
default

set radius authentication

Set a primary or secondary 
RADIUS server IP address

set radius authentication server

Configure a character string to be 
used as a “shared secret” between 
the switch and the RADIUS server

set radius authentication secret

Set the RFC 2138 approved UDP 
port number.

set radius authentication udp-port

Set the number of times an access 
request is sent when there is no 
response

set radius authentication 
retry-number

Set the time to wait before 
re-sending an access request

set radius authentication retry-time

Remove a primary or secondary 
RADIUS authentication server

clear radius authentication server

Display all RADIUS authentication 
configurations. Shared secrets are 
not displayed.

show radius authentication