Avaya P330-ML-ML Manuel D’Utilisation

Chapter 2        Avaya P330-ML Layer 2 CLI Commands

106

Avaya P330-ML Reference Guide

User level: privileged, supervisor.
L This command applies to P333T-PWR switches only and is used by P330-

ML-ML switches to control P333T-PWR modules in the stack.

Use the set powerinline external power command to set the maximum 
power available from the external power supply to power DTEs.

The syntax for this command is:

set powerinline external power <module_number> <power> 

Example:

User level: privileged, supervisor.
Use the set ppp authentication command to define the authentication 
method used for a PPP server or client session.

The syntax for this command is: 

set ppp authentication incoming

 {pap|chap|none}

Example: 

module_number

Number of the module for which external power is to be 
allocated

power

Value of the maximum power allocated to powering DTEs 
in Watts.

external power set to 200Watts

pap

PAP authentication method

chap

CHAP authentication method

none

No authentication

P330-N# set ppp authentication incoming chap

PPP requires CHAP authentication for incoming sessions.