Avaya P330-ML-ML Manuel D’Utilisation

Chapter 2        Avaya P330-ML Layer 2 CLI Commands

Avaya P330-ML Reference Guide

117

User level: privileged, supervisor.
Use the set spantree default-path-cost command to set the version of the 
spanning tree default path costs that are to be used by this bridge.

The syntax for this command is:

set spantree default-path-cost <path-cost>

Example:

User level: privileged, supervisor.
Use the set spantree disable command to disable the spanning-tree 
algorithm for the switch.
L When you disable STP, blocking ports are disabled in order to prevent loops in 

the network. As a result, you need to wait 30 seconds before disabling STP if 
you reset the switch, enable STP, or insert a new station. 

The syntax for this command is:

set spantree disable 

Example:

User level: privileged, supervisor.
Use the set spantree enable  command to enable the spanning-tree algorithm 
for the switch.
L When you disable STP, blocking ports are disabled in order to prevent loops in 

the network. As a result, you need to wait 30 seconds before disabling STP if 
you reset the switch, enable STP, or insert a new station. 

path-cost

  common-spanning-tree - compatible with ieee802.1D standard
  rapid-spanning-tree - compatible with ieee802.1W standard

P330-N# set spantree default-path-cost rapid-spanning-tree

Spanning tree default path costs is set to rapid spanning 

tree.

P330-N# set spantree disable

bridge spanning tree disabled.