Avaya P330-ML-ML Manuel D’Utilisation
Chapter 2 Avaya P330-ML Layer 2 CLI Commands
Avaya P330-ML Reference Guide
159
show port auto-negotiation-flowcontrol-advertisement
User level: privileged, supervisor.
Use the show port auto-negotiation-flowcontrol-advertisement
command to display the flowcontrol advertisement for a Gigabit port used to
perform auto-negotiation.
Use the show port auto-negotiation-flowcontrol-advertisement
command to display the flowcontrol advertisement for a Gigabit port used to
perform auto-negotiation.
The syntax for this command is:
set auto-negotiation-flowcontrol-advertisement
[mod_num/port_num]
Example:
show port channel
User level: user, privileged, supervisor
Use the show port channel command to display Link Aggregation Group
(LAG) information for a specific switch or port.
Use the show port channel command to display Link Aggregation Group
(LAG) information for a specific switch or port.
The syntax for this command is:
show port channel [<mod_num>[/<port_num>]] [info]
mod_num
(optional)
(optional)
Number of the switch
port_num
(optional)
(optional)
Number of the port
P330-N>show port auto-negotiation-flowcontrol-
advertisement
Port 1/1 advertises no flow control capabilities.
Port 1/2 advertises no flow control capabilities.
Port 1/3 advertises no flow control capabilities.
mod_num
(Optional)
(Optional)
Number of the switch. If you do not specify a number, the
modules on all the switches are shown.
modules on all the switches are shown.
port_num
(Optional)
(Optional)
Number of the port on the switch. If you do not specify a
number, all the ports on the switch are shown.
You can also specify a range of ports separated by a dash, for
example, 4/5-13 for ports 5 to 13 on switch 4.
number, all the ports on the switch are shown.
You can also specify a range of ports separated by a dash, for
example, 4/5-13 for ports 5 to 13 on switch 4.
info (Optional)
Display port information