Avaya P330-ML-ML Manuel D’Utilisation
Chapter 3 Avaya P330-ML Layer 3 CLI Commands
Avaya P330-ML Reference Guide
271
show upload status
User level: user, privileged, supervisor
Use the show upload status commands to display the status of the current
configuration file copy process from the device.
Use the show upload status commands to display the status of the current
configuration file copy process from the device.
The syntax for this command is:
show upload status
[<mod_num>]
Example:
show vlan
User level: user, privileged, supervisor
Use the show vlan command to display router Layer 3 interfaces.
Use the show vlan command to display router Layer 3 interfaces.
The syntax for this command is:
show vlan
Example:
terminal
User level: user, privileged, supervisor
Use the terminal width and terminal length commands to set the width
and length of the terminal display in characters.
Use the terminal width and terminal length commands to set the width
and length of the terminal display in characters.
mod_num
(Optional)
(Optional)
Number of the module. If you do not specify a number, upload
statuses for all modules in the stack are shown.
statuses for all modules in the stack are shown.
Router-N> show upload status 1
Module : 1
Source file : stack-config
Destination file : c:\conf.cfg
Host : 149.49.36.200
Running state : Executing
Failure display : (null)
Last warning : No-warning
Router-N> show vlan
VLAN NAME VLAN ID VLAN MAC
---------------- ------- -----------------
Default 1 02:e0:3b:1d:f9:01