Avaya P330-ML-ML Manuel D’Utilisation

Chapter 3        Avaya P330-ML Layer 3 CLI Commands

278

Avaya P330-ML Reference Guide

User level: privileged, supervisor.
Use the ip netbios-rebroadcast command to set the NETBIOS rebroadcasts 
mode on an interface. 
Use the no ip netbios-rebroadcast command to disable NETBIOS 
rebroadcasts on an interface.

The syntax for this command is:

[no] ip netbios-rebroadcast [<direction>]

The possible values for direction are: 

Example:
To enable rebroadcasting of netbios packets received by and sent from the interface 
“marketing”:

User level: privileged, supervisor.
Use the ip ospf authentication-key command to configure the interface 
authentication password. 
Use the no ip ospf authentication-key  command to remove the OSPF 
password.

The syntax for this command is:

[no] ip ospf authentication-key <key>

Example:

both

Netbios packets received on the interface rebroadcasted to 
other interfaces and netbios packets received on other 
interfaces are rebroadcasted into this interface. This is the 
default value.

disable

Netbios packets are not rebroadcasted into or out of this 
interface.

Router-N(config-if:marketing)# ip netbios-rebroadcast both

key

string (up to 8 characters)

Router-N(configure-if:marketing) # ip ospf authentication-