Avaya P330-ML-ML Manuel D’Utilisation
Chapter 3 Avaya P330-ML Layer 3 CLI Commands
294
Avaya P330-ML Reference Guide
Example:
passive-interface
User level: privileged, supervisor.
Use the passive interface command to allow interfaces to be flooded into the
OSPF domain as OSPF routes and not external routes.
L An interface becomes passive only if you use the network command to enable
Use the passive interface command to allow interfaces to be flooded into the
OSPF domain as OSPF routes and not external routes.
L An interface becomes passive only if you use the network command to enable
OSPF to run on the interface.
The syntax for this command is:
passive-interface <interface-name/net addr>
Example:
redistribute
User level: privileged, supervisor.
Use the redistribute command to redistribute routing information from other
protocols into OSPF.
Use the no redistribute command disables redistribution by OSPF.
Use the redistribute command to redistribute routing information from other
protocols into OSPF.
Use the no redistribute command disables redistribution by OSPF.
The syntax for this command is:
[no] redistribute <protocol>
area id
Area ID. This parameter exists for compatibility with
P550.
P550.
Router-N(configure router:ospf)# network 192.168.0.0
Router-N(configure router:ospf)# area 192.168.0.0
0.0.255.255 area 0.0.0.0
interface-name /
net addr
net addr
Name of interface or IP address.
Router-N# passive-interface FastEthernet 1.10
protocol
• static
• conneted
• RIP
• conneted
• RIP